501/423 | Ex d & Ex e | Cable Gland
The Hawke 501/423 is a Group II certified double seal cable gland suitable for installation in Zone 1/21 and Zone 2/22 hazardous areas.
Showing all 9 results
-
-
501/414 | Ex d & Ex e | Cable Gland
The Hawke 501/414 is a Group II certified single seal cable gland, with a female running coupler, suitable for installation in Zone 1/21 and Zone 2/22 hazardous areas.
-
ICG/653/UNIV | Ex d & Ex e Cable Gland
Integrated earthing ring suitable for single wire armour ‘W’, wire braid ‘X’ and tape armour ‘Z’.
-
501/453/UNIV | Ex d & Ex e cable gland
This cable gland is the first and only cable gland that can be upgraded to a barrier solution in the field. Read more in the datasheet.
-
501/421 | Ex d & Ex e | Cable Gland
The Hawke 501/421 is a Group II certified single seal cable gland suitable for installation in Zone 1/21 and Zone 2/22 hazardous areas.
.
-
Product Type C***IE*
“C***IE” type single compression glands provide a controlled IP and environmental seal on the outer sheath and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables. The gland has been tested to IP66 and options are available for use with LSOH cables and extreme temperature applications.The Inegral Earth (IE) version allows the gland to be used with HV cables where the fault load is greater than 10.4kA.
-
Product Type Industrial C
“C” type single compression glands provide a controlled IP and environmental seal on the outer sheath and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables. The gland has been tested to IP66 and options are available for use with LSOH cables and extreme temperature applications.
-
Product Type Industrial E
“E” type double compression glands provide a controlled IP seal on the cable inner sheath, an environmental seal on the outer sheath and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables. The gland has been tested to IP66 and IP68 to 50 metres. The Integral Earth, “IE” version, allows the gland to be used with HV cables where the fault load is greater than 10.4kA and options are available for use with lead sheath, LSOH cables and extreme temperature applications.
-
Product Type UL-C*
IP RATING:
IP66 & IP68 (100 metres – 7 Days), Type 4X, Oil Resistant II & DTS01:1991
OPERATING TEMP:
-60°C to 135°C (-25°C to 85°C for UL applications)
MATERIALS:
Brass or Stainless Steel
PLATING:
Electroless Nickel
COMPOUND:
Peppers T-1000 Sealing Compound
ELASTOMERIC SEAL:
Silicone LSOH